Decra Led® is a lead strip with
self adhesive backing - it is manufactured from
refined lead ingots and is guaranteed to be a minimum
99% lead. It can be applied to any flat glass surface,
providing it is clean and dry. It is suitable for
internal and external use and has a ten year
guarantee. In use world wide, it can withstand rain
and the extremes of temperature. Decra Led® is
ideally suited for use in double glazing manufacture,
the manufacture of furniture panels or for in-situ
application to existing windows.
Decra Glow® is manufactured from
premium quality polyester colour film, incorporating
highly efficient UV filters to protect against fading.
Polyester film does not shrink, as is the case with
cheaper vinyl films. Because a polyester laminate
protects the colour, the film is both solvent
resistant and highly scratch resistant. Decra Glow®
is also covered by a ten year guarantee.
The acrylic adhesive used is
waterproof and resistant to extremes of temperature,
being used world wide. However, as a contact adhesive
its use on textured glass is not recommended. Please
check with our technical department before using.
Decra Glow® can be used on single
and double glazing. In a double glazed unit, the film
should be inside the cavity, usually on the inside
face of the outside pane. With single glazing, it is
recommended that the film be fixed to the room side of
Our range of Decra Lite® borders, endcaps and
roundels are all manufactured on Decra Glow®
polyester colour film.
The Borders are available in sheets of 660mm x 460mm,
containing 13 strips, 35mm wide.
The Endcaps are available in sheets of 290mm x 185mm,
containing 40 endcaps 35mm square.